Monitor
Screen Door Won't Close Properly
Pool cage screen door stuck, won't close, or won't latch in Orlando. Common causes and fixes for screen enclosure doors.
A screen door that won’t close properly is more than an annoyance — it’s a Florida Building Code violation. Pool enclosure doors must self-close and self-latch for child safety.
Common causes
- Worn rollers — The #1 cause. Rollers wear out every 5-8 years in FL climate.
- Dirty or bent track — Debris in the track or a bent rail prevents smooth operation
- Failed self-closer — Pneumatic closer or spring hinge has lost its force
- Misaligned frame — Door frame has shifted or warped
- Swollen/corroded hardware — Humidity causes latches and hinges to seize
DIY quick fixes
- Clean the bottom track with a brush and silicone spray
- Adjust the self-closer tension screw (usually at the top of the closer)
- Tighten loose screws on hinges and handle hardware
When to call a pro
If cleaning and adjusting doesn’t solve it, the rollers, closer, or door itself likely needs replacement. Most door repairs run $200-$600 and are completed in under an hour.
Related service
View our screen door repair service →See this on your pool cage? Send us a photo.
We'll tell you what it is, what it needs, and what it costs — within 24 hours, no pressure.